Repairing Commercial Garage Doors

Everything To Know About Repairing Commercial Garage Doors

September 23, 2022

If your garage door is heavy, crooked, or not responding to your commands, the first step is to check the torsion springs. A heavy door will also stress the door’s motor, so hiring someone to work on your garage door repair is a good idea, as they can check the springs.

Unresponsive Garage Door

When your garage door isn’t responsive to your remote control, check a few things before you call a maintenance specialist. First, it may be due to a bad sensor or alignment issues. These issues could lead to an unsafe garage door, resulting in injuries. In addition to a poor sensor, the door could also be dirty.

To start, you should check the garage door transmitter. If the door isn’t responding to the transmitter, you may need to change the frequency. The process of doing this varies for different garage door models. For more detailed instructions, consult a commercial garage door repairs expert.

Damaged Cables

Garage door cables are an important part of your garage door, making it easier to raise and lower. Unfortunately, cables can break or become detached. Fortunately, you can safely repair damaged cables. Here are some tips to keep in mind. Damaged cables can make your door heavier than it should be and damage your garage door motor.

Inspect your cables regularly to avoid damage. Fraying or rusted cables should be replaced before they snap or cause damage. Also, cables that sag can cause problems. These cables are more likely to break or become unwound from the drum rollers. Checking the cables for sagging is a great way to fix the problem before it becomes too late.

Damaged Pulleys

One of the most common issues when repairing garage doors is damaged pulleys and tracks. These parts often get damaged due to dirt and dust accumulation in the tracks and garage door. In addition, the accumulated dirt and dust will accelerate damage to the pulley and tracks. To prevent these issues, it is best to call a professional who will fix them properly.

A damaged pulley will cause the door to shake and create more noise than normal. In addition, it will damage the cables and ball bearings. It can also cause the door to close unevenly, leaving a gap at the bottom. To determine if the pulley is damaged, inspect the door’s cable and see if it’s frayed or has a crack.

Out-Of-Balance Garage Door

Out-of-balance garage doors are dangerous to operate and can cause injury. To prevent this from happening, you should check your door balance regularly. This should be done by disconnecting the opener from the door and manually opening and closing it. When the door is in an improper balance, it puts uneven pressure on the parts of the door, which may lead to the breakage of a component.

First, check if the door is stuck or moves slowly. If it moves smoothly, it should be able to be lifted and released with a single hand. If it sticks, you should lubricate the door parts to ensure they open and closes correctly. However, if you cannot lift the door, you should contact a professional to help you.

Out-Of-Stripping Garage Door

If your garage door isn’t sealed properly, it could lead to several problems, including leaks, water damage, and termites. To prevent these problems, you should check your door’s weather stripping at least once a year. This material protects your garage door and seals the inside air to prevent it from escaping.

No Comments

    Leave a Reply